IFRS S1 for Industrial Manufacturing in Mexico: 2026 Guide
IFRS S1 establishes general requirements for BMV and BIVA-listed issuers to disclose material information about sustainability-related risks and opportunities in their annual reports. CNBV made it mandatory starting January 2025, with the first report covering FY2025 data due in 2026. IFRS S1 acts as the umbrella standard that complements IFRS S2 on climate-specific matters.
Industrial manufacturing is the sector with the highest Scope 1 footprint in Mexico. IFRS S2 requires disclosure of physical risks (flooding at coastal plants, water stress in northern states) and transition risks (carbon cost on existing assets). CNBV may require restatement if assurance finds material errors in process data.
Why IFRS S1 Applies Differently in Industrial Manufacturing
Sustainability Director and CFO of listed industrial groups required by CNBV to report IFRS S1/S2 from 2026
Multiple plants across different states with varying electricity suppliers, making it hard to consolidate Scope 2 under market-based vs. location-based methodology required by IFRS S2 paragraph 29
Deep industrial supply chains (5+ tiers) where Scope 3 category 1 (purchased goods) calculation requires primary emission factors that Mexican SME suppliers do not have
Limited assurance audit required from 2027: financial auditors lack methodology to verify CO₂ tonnes from rotary kilns or high-temperature processes
TCFD embedded in IFRS S1: climate scenario analysis (RCP 4.5 / SSP2-4.5) for plants in water-stressed areas in Sonora, Chihuahua and Nuevo León with 2030-2050 horizon
Critical IFRS S1 KPIs for Industrial Manufacturing
| Required KPI | Data Source | Difficulty |
|---|---|---|
| Carbon intensity: tCO₂e per tonne of finished product | Direct combustion (Scope 1) | High 🔴 |
| Total energy consumption (GJ) broken down by source: natural gas, electricity, diesel, biomass | Electricity bills (Scope 2) | High 🔴 |
| Percentage of renewable energy in electricity mix (verifiable CELs from CRE) | Cat 1 - Bienes y servicios comprados | High 🔴 |
| Water intensity: m³ consumed per tonne produced | HR / payroll system | Medium 🟡 |
| Rate of hazardous waste sent to landfill vs. recycling (NOM-052-SEMARNAT-2005) | ERP / accounting system | Medium 🟡 |
Hard-to-Collect Data in Industrial Manufacturing
Fuel consumption per burner in high-temperature kilns (natural gas, petroleum coke, biomass) broken down by plant and shift
Process emissions (non-combustion) in cement plants: CO₂ from limestone calcination that does not appear on energy invoices
Water intensity per tonne produced in plants with groundwater extraction without certified metering
That is why manual Excel-based processes will not pass the 2027 assurance. Without automated traceability, an external auditor cannot verify the completeness or accuracy of emissions data.
Checklist: 8 Steps to Comply with IFRS S1 in Industrial Manufacturing
- 1
Identification and disclosure of all sustainability-related risks and opportunities material to the enterprise
- 2
Description of board and management oversight of sustainability risks
- 3
Scenario analysis to assess strategy resilience under different sustainability futures
- 4
Description of processes for identifying, assessing, and managing sustainability risks integrated into corporate governance
- 5
Disclosure of metrics and targets used to manage and monitor material risks and opportunities
- 6
Connect data sources (ERP, meters, suppliers) to a centralized platform
- 7
Review with internal audit team and adjust consolidation perimeter
- 8
Generate report in CNBV/CINIF format ready for external assurance
How Climatta Automates IFRS S1 for Industrial Manufacturing
Automated Collection
Eliminate spreadsheets in Industrial Manufacturing. Climatta connects your systems and automatically collects Carbon intensity: tCO₂e per tonne of finished product and other critical KPIs.
Auditor-Grade Traceability
Every data point has source, date, and owner documented. The 2027 assurance auditor can trace every figure to its origin in your systems.
IFRS S1 Report Ready
Generates the report in the exact CNBV format — tables, metrics, and narrative. No last-minute manual reformatting.
Onboarding in 4 Weeks
Climatta connects to Industrial Manufacturing systems in 4 weeks. No months-long IT project or external implementation consultant.
FAQ: IFRS S1 in Industrial Manufacturing
Ready to comply with IFRS S1 in Industrial Manufacturing?
Climatta centralizes all data collection, generates the report in regulatory format, and leaves it ready for 2027 external assurance. No spreadsheets.